Re: ,Request for test in Matlab

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Pantxo
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.


Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Nikhil Pallamreddy
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.


untitled.jpg (16K) Download Attachment
Selection_017.jpg (369K) Download Attachment
untitled.fig (25K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Pantxo
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Nikhil Pallamreddy
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo


Selection_018.jpg (423K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Pantxo
Le 02/09/2018 à 21:12, Nikhil Pallamreddy a écrit :
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Sorry again, can you try

cla;

h = imagesc ([-1,1], [-5, 5], 1:10);

yl = get (h, 'ydata')


Pantxo

Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Nikhil Pallamreddy
There was no error message this time around.

On Mon, Sep 3, 2018 at 12:44 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:12, Nikhil Pallamreddy a écrit :
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Sorry again, can you try

cla;

h = imagesc ([-1,1], [-5, 5], 1:10);

yl = get (h, 'ydata')


Pantxo


Selection_019.jpg (310K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Pantxo
Le 02/09/2018 à 21:17, Nikhil Pallamreddy a écrit :
There was no error message this time around.

On Mon, Sep 3, 2018 at 12:44 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:12, Nikhil Pallamreddy a écrit :
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Sorry again, can you try

cla;

h = imagesc ([-1,1], [-5, 5], 1:10);

yl = get (h, 'ydata')


Pantxo

Strange, ylim is now [-15 15], can't make any sense out of this ...

Sorry Nikhil, you did not run the last part "yl = get (h, 'ydata')", what is the value of "yl"?


Pantxo

Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Nikhil Pallamreddy
h = imagesc ([-1,1], [-5, 5], 1:10); %ran this snippet

yl = get (h, 'ydata')

On Mon, Sep 3, 2018 at 1:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:17, Nikhil Pallamreddy a écrit :
There was no error message this time around.

On Mon, Sep 3, 2018 at 12:44 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:12, Nikhil Pallamreddy a écrit :
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Sorry again, can you try

cla;

h = imagesc ([-1,1], [-5, 5], 1:10);

yl = get (h, 'ydata')


Pantxo

Strange, ylim is now [-15 15], can't make any sense out of this ...

Sorry Nikhil, you did not run the last part "yl = get (h, 'ydata')", what is the value of "yl"?


Pantxo


Selection_020.jpg (79K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: ,Request for test in Matlab

Pantxo
In reply to this post by Pantxo
Le 02/09/2018 à 21:52, Nikhil Pallamreddy a écrit :
Heya,

My apologies. Was half asleep and didn't notice that gmaill was hiding part of the text.

Cheers!

On Mon, Sep 3, 2018 at 1:21 AM Nikhil Pallamreddy <[hidden email]> wrote:
h = imagesc ([-1,1], [-5, 5], 1:10); %ran this snippet

yl = get (h, 'ydata')

On Mon, Sep 3, 2018 at 1:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:17, Nikhil Pallamreddy a écrit :
There was no error message this time around.

On Mon, Sep 3, 2018 at 12:44 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:12, Nikhil Pallamreddy a écrit :
The screenshot is attached.

On Mon, Sep 3, 2018 at 12:38 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 21:01, Nikhil Pallamreddy a écrit :
Ran modified code. Screenshot attached. 
The code seems to have failed and yl=1.

On Mon, Sep 3, 2018 at 12:15 AM Pantxo Diribarne <[hidden email]> wrote:
Le 02/09/2018 à 19:01, Nikhil Pallamreddy a écrit :
> Heya,
>
> Not quite sure if this is what you wanted or even if this is the way I
> need to respond. New here.
>
> Running 2018a on Ubuntu 16.04.

No, I didn't expect this code to fail so early :-). I am adding the
maintainers list again in the CC (you should answer to all so that
everybody knows).

Could you or someone else run the modified attached code:

imagesc([-1,1], [-5, 5], 1:10)
print -dsvg xydata.svg

yl = get (h, 'ydata')


I am interested to know whether this code fails and if not what is the
value of yl.


Thanks.

The previous snippet failed because yl is a scalar and I requested its second element in sprintf. Now what does these two lines code produce?

imagesc ([-1,1], [-5, 5], 1:10) % I expect this to fail. What is the error message

yl = get (h, 'ydata')                % If the above did not fail, yl?


Pantxo

Sorry again, can you try

cla;

h = imagesc ([-1,1], [-5, 5], 1:10);

yl = get (h, 'ydata')


Pantxo

Strange, ylim is now [-15 15], can't make any sense out of this ...

Sorry Nikhil, you did not run the last part "yl = get (h, 'ydata')", what is the value of "yl"?


Pantxo

Many thanks Nikhil. Let's now continue the discussion on the bug tracker:

https://savannah.gnu.org/bugs/?54610

Pantxo